This is a listing of some of the most often needed Stock Motor Parts and Cranks.
Please inquire about any part or repair you may require. We stock many more items than we
have listed here.
Springs
Price quoted is for spring only, or when purchased with motor rebuild. For safe and
simplified home-installation, send spring barrel (s) and center shaft. $29.00 additional per spring
for labor, and we will grease, install, and hook up
your new spring(s), ready to be replaced in your motor. (We do not recommend the
installation of one new spring to work with old.)
Most Victrolas and Victors $59.00
Specify Model, Width, both end types.
STEEL SHEAR PIN... this pin holds winding gear in place
on winding shaft. Used on all model Victors and Victrolas.
GOVERNOR SPRINGS. new set of 3. For outside horn Victors or for
Victrolas. Specify model &/or measurements, or send sample to match. The quality and
exactness of this part are critical for proper performance. Best to replace entire set
of springs.
Most $9.00-$15.00 New, common size screws & washers available. Inquire
with Model details.
|
VICTROLA GOVERNOR WEIGHTS. New set of 3. Half
sphere with 3/4" flat mounting face. Includes screw & washer on each
weight.
* Gears and Governors *
Governor Shaft. |
Specify model. |
$35.00 and up |
Other gears available. |
Inquire. |
Inquire. |
* Cranks * |
 |
Victor Crank |
Outside horn models. New Slot or threaded. Specify model. |
$35.00 to $65.00 |
Victor Victrola Crank. |
Old stock. Male or female. Specify model. |
Most $60.00 to $125.00 |
Victor Victrola Crank |
New. Specify model, male or female, and length needed to clear edge of cabinet. |
Most $45.00 to $75.00 |
Oils and Spring Grease. see 'Oil and
Lubricants'
APSCO
7994 CR 10, PO Box 123
Davenport Center, N.Y. 13751
Voice & FAX : 607-278-6218
email: apsco@antiquephono.com

Email:
apsco@antiquephono.com
Copyright © 1997
CompanyLongName
Last modified:
December 11, 2014
|
|